Project DiaStar
From ProjectDiaStar
Contents |
Introduction
The links below lead to user-level documentation on installing, configuring and running the DiaStar™ server and client software.
Online demos of Diastar's video capabilities are also available. Instructions on how to access them can be found on the DiaStar Multimedia Demos page.
DiaStar™ Server
You will need both the DiaStar™ Server and a client (see below) for a complete DiaStar™ installation.
Instructions for downloading, installing, configuring and using the open source software follow:
- Hardware - DiaStar™ Server compatible hardware
- Licenses - DiaStar™ Server licenses
- Installation Guide V2.0 - How to install your DiaStar™ Server
- User Guide V2.0 - How to configure and run a DiaStar™ Server
- Adding Additional Ports - Upgrading your server
DiaStar™ Clients
Clients provide the interface between a PBX and the DiaStar™ Server:
Asterisk (chan_woomera)
- Installation Guide V2.0 - Setting up the Woomera client with Asterisk
- User Guide V2.0- Asterisk Dialplan commands used with DiaStar Server V2.0
FreeSWITCH (mod_woomera)
Comming soon!!
DiaStar™ Support
- Support - Where to go for support
